Xiaomi Redmi Note 8 İmei Repair Without Box & Dongle

Xiaomi Redmi Note 8 İmei Repair Without Box & Dongle 1 – imei repair

Xiaomi Redmi Note 8 İmei Repair Without Box & Dongle

Hello Friends I will tell you about imei repair operations without box or dongle for Redmi Note 8.Here are a few important warnings I need to make;

Xiaomi Redmi Note 8 İmei Repair

1-Imei repair operations are intended only for installing original imei on devices whose imei registration has been corrupted.

2-the operations performed are entirely the responsibility of the person who made them.

Yeah, we can start now.; First,the bootloader lock of your device must be open and twrp installed,then qualcomm, adb drivers must be installed on your computer. You also need to turn on usb debugging mode on the phone. After downloading and preparing programs, we can move on to the process.If you do not want to receive any errors,please follow the procedures one-on-one.

1-Turn Off Your Phone, then switch the phone to twrp mode by turning on the volume and pressing the power button together.

2-Connect your phone to your computer with a usb cable, and then click RESET EFS auto in the EFS Reset Tool file.bat run.(Run normally,not as administrator)

3-Restart Your Phone,check imei with *#06# when the phone is switched on both imei must be deleted.

4-open the ENG qcn file with hex editor and search for 083a55 hex.You’ll just find a value and you’ll have to change this place.With Imei converter, type the imei number you want to change into hex format, starting with line 08, where you find it in hex editor, and save the file.

5-Enter the following codes by opening Minimal ADB and Fastboot as an administrator; adb devices adb shell water setprop sys.usb.config diag, adb if you ask for permission from your phone, accept it.Check Device Manager to confirm that a diag connection has been established on the com port.If a 901D connection is established, you can close the minimal ADB program.

6-open the Qpst program as an administrator at the top of the start client tab under the software download program click.When the program opens, go to the restore section next to it and click Browse. Select qpst nv memory files qcn at the bottom by changing the Select File section on the side.

Now the qcn file you have edited will be seen, select it and click the start button at the bottom.Wait until the installation is done,after the installation is finished,your phone needs to be turned off and turned on,if you turn off the program by saying exit with its own shutdown, then restart your phone.The imei 1 section of your phone should be 0,and the imei 2 section should be the imei number you installed. These operations have been tried and two phones have been installed smoothly Hi Friends I will explain the imei repair process for Redmi Note 8 without box or dongle.Xiaomi Redmi Note 8 İmei Repair Without Box & Dongle

1-Qpst program

2-Minimal Adb and Fastboot programı

3-Redmi Note 8 Efs Reset Tool

4-Redmi Note 8 Eng Qcn File

5-Hex Editör Program

6-İmei Converter

(Xiaomi Redmi Note 8 İmei Repair Files are delicebirselcan.com Programs section)



Mobil sürümden çık